Features:
- Displays the current wind value on a large, brightly lit LED display
- Users can set a wind speed alarm level
- The LSI Wind Speed System consists of: GS320
Wind Speed Display/Receiver, Display Power Cable and GS020 Wireless Battery-Powered Anemometer
(GS020 Anemometer has the ability to communicate with the GS320, GS550 and GS820 Displays, and
with the Gateway)
- Users can display wind speed units in mile per hour or meters per
second
- Line of sight communication range: 4,000 feet (1,300 meters)
- Has the ability
to output a lockout signal to engage hydraulic solenoid valves (or output the alarm signal to an external
light or siren)
- LSI GS Series Displays and Sensors feature accurate and reliable Direct
Sequence-Spread Spectrum-Two Way Communication
- Users can order extra displays that
work in “listening mode” (In “listening mode,” an unlimited number of displays
can listen to ONE wind speed sensor. For example, if you have a refinery application and you buy one
wind speed sensor and place it at the highest point, you can then have an unlimited number of displays
spread out monitoring distance and showing the wind speed value on each display from the single wind
speed sensor.)
- To save battery life, when the display is powered off the wind sensor goes into
“listening mode” and will not transmit until the display is turned back on
- Powered
by 1 D-Cell Lithium Battery
- Up to 2 years battery life
- Standard accuracy is 3%, with the
option of an NIST traceable version (with 1% accuracy)
- Display voltage input is 10-30 volts
- 2 year warranty against defects
- Display Dimensions: 4.7” tall X 3.7” wide X
1.125” deep
- Display ships with ram mounting bracket allowing for easy positioning of the
display
|
